The barcode on your product is older than most of the equipment that reads it. It was invented to solve a grocery-store problem, picked through an industry committee, and has been extended rather than replaced ever since.

That history is more than trivia. Many rules you run into today, such as a number that must come from GS1, a symbol that can change while the number stays, and a UPC that sits beside a QR code, make sense once you know how they came about.

1949: a patent for lines and circles

Norman J. Woodland and Bernard Silver filed U.S. patent 2,612,994, "Classifying Apparatus and Method," on October 20, 1949. It was granted on October 7, 1952, according to the patent record.

The patent describes machines that classify items by reading a pattern of light and dark lines. The presence or absence of a line stands for a binary digit. A later version uses concentric circles so the code can be read no matter how the item is turned.

The Smithsonian's account says the patent described a bull's-eye design. RCA's bull's-eye system was later tested in a store, as the next section shows.

The early 1970s: the grocery industry picks a symbol

According to the Smithsonian, it took an industry committee about four years to reach a workable proposal for a Universal Product Identification Code.

The aim was one code that every supplier and checkout could share. RCA's bull's-eye system was first tested at a Kroger store in Cincinnati, where automated checkstands were installed on July 3, 1972. On March 30, 1973, a symbol selection committee chose a rectangular IBM design, created by George Laurer, instead.

That choice is why a U.S. product carries the familiar row of bars. The bull's-eye lost, even though the 1952 patent described a circular pattern.

June 26, 1974: the first UPC scan

The first item marked with a UPC was scanned at Marsh Supermarket in Troy, Ohio, on June 26, 1974. The Smithsonian notes that legend says the item was a pack of Juicy Fruit gum, and it adds that the museum did not collect the pack. GS1 Sweden's about page also dates the first grocery barcode scan to June 26, 1974, and names Wrigley's gum at a Marsh supermarket in Ohio.

The Smithsonian says Marsh's research head, Clyde Dawson, chose the pack. Because the gum rests on legend, treat it as well-repeated lore rather than a documented record.

Adoption was not instant. The Smithsonian says bar codes took off in grocery and retail in the 1980s, after mass merchandisers, starting with Kmart, adopted the UPC. From the 1949 filing to that first scan took 25 years.

1977 and 2005: from UPC to EAN to GS1

Europe built its own system. GS1 Sweden says the European Article Numbering Association (EAN) was set up in Brussels in 1977 as a non-profit standards body.

The EAN symbol looks like a UPC, but it adds a thirteenth digit. That is why the two formats are related today: a UPC-A is an EAN-13 whose first digit is zero, and the UPC vs. EAN guide shows the conversion.

In 2005 the U.S. and European organizations merged. GS1 Sweden says the UCC (Uniform Code Council) and EAN joined to form a single international organization of national GS1 offices. Separately, U.S. and Canadian retailers were expected to scan EAN symbols by January 1, 2005; the UPC vs. EAN guide has the details.

The 2D move: Sunrise 2027

The newest chapter changes the symbol again. GS1 US describes Sunrise 2027 (which GS1 itself calls Ambition 2027) as a global transition from 1D UPC barcodes to 2D barcodes, such as QR codes. Its retailer steps include installing scanners that can read 2D barcodes and extract the GTIN at the register.

GS1's 2D retail guideline states the initial goal: retail scanning that can read and process the GTIN by the end of 2027. GS1 presents this as an industry target, not a legal mandate. From 1974 to the end of 2027 is 53 years of one family of linear symbols at checkout.

The guideline lists three 2D options for point of sale: GS1 DataMatrix, QR Code with GS1 Digital Link syntax, and Data Matrix with GS1 Digital Link syntax. It also says linear barcodes such as EAN/UPC will not go away, and that until 90% of scanning solutions can use GS1-compliant 2D codes, products with a retail 2D barcode must also carry a linear one. For how a Digital Link code is built, see the GS1 Digital Link guide.

What the history explains about today's rules

Four rules you meet today follow from this story.

  • The number is the constant. The patent was about reading a pattern. What the industry standardized was the product identifier, and the symbol around it has changed from UPC to EAN to, soon, 2D. That is why the same GTIN appears in a QR code as in your UPC.
  • Numbers need a central issuer. A shared code only works if two companies never use the same number, which is why GS1 licenses them (see how to get UPC barcodes). A generator, including ours, draws the bars but cannot issue a number.
  • Old symbols stay. The new guidance keeps linear barcodes beside 2D ones during the transition, so keep printing your UPC.
  • Acceptance is set by industry, not by law. The 1973 choice, the 2005 EAN date and the 2027 goal were all industry decisions. Check a specific retailer's requirements, because they can be stricter than the GS1 minimum.

Next step

If you sell at retail, keep your UPC-A on the package. Then see where a QR code could sit beside it by reading QR code vs. barcode. If you already have your GTIN and want a code that works for both phones and registers, you can build one with our GS1 Digital Link generator.

Sources

  1. Google Patents (U.S. patent 2,612,994): US2612994A - Classifying Apparatus and Method (accessed )
  2. Smithsonian Magazine: The History of the Bar Code (accessed )
  3. GS1 Sweden: About us (accessed )
  4. GS1 US: What is GS1 Sunrise 2027? (accessed )
  5. GS1: 2D Barcodes at Retail Point-of-Sale Implementation Guideline (accessed )

Edited by Plain Barcode. Drafted with AI writing tools and checked against the sources listed above.

How guides are researched and corrected: Editorial Policy. Spotted an error? Email hello@plainbarcode.com.

Newsletter

Get an e-mail when Plain Barcode publishes something new

At most one e-mail a day, only about new guides and tools. No tracking pixels. How we handle your address